Home / Beds & Bed Frames / LED Metal Bunk Bed, Twin Over Twin with 2 Storage Drawers
LED Metal Bunk Bed, Twin Over Twin with 2 Storage Drawers
Beds & Bed Frames

LED Metal Bunk Bed, Twin Over Twin with 2 Storage Drawers

Part of the Beds & Bed Frames collection
$186.29
Buy Now

Power on a top bunk is normally an extension cord taped to a leg, and it is the detail parents solve badly. The charging station here comes with an eight-foot cord and clamps wherever you want it on the upper frame. Eight feet is measured to reach from a wall outlet, up the height of the bunk, along to the head of the bed. Route it once, cable-tie it to the tubing along its whole run, and it stops being a cord hanging in a child’s bedroom.

Configuration
Twin over twin, separable
Charging
2 USB, 1 Type-C, 8 ft cord
Tubing
1.5 in round
Guardrails
16.5 in full length

How it lives in the room

Route the cord before the mattresses

Decide the outlet, run the cord up a rear leg, and secure it every twelve inches. Doing this with bare frame is a five-minute job; doing it later means working around bedding on a ladder.

Mount the station where a hand lands

The point of a movable station is that it sits where the sleeper actually reaches — usually the guardrail beside the pillow, not the footboard. Have the child lie down and point.

Round tube, not square

The 1.5-inch round tubing is a deliberate safety choice on a bed children climb. There is no square edge to catch a shin at speed. It also means clamps and hooks designed for flat rails will not grip; use the hooks supplied.

Before you order

The LED strip runs to sixty thousand colours and twenty-plus modes. Set a warm low preset as the default before you hand over the remote, because the first thing any child does with a colour picker is find the brightest blue in it.